SSRC the ability to interact effectively with theatrical dealers, representatives and consultants.

Home » Product » Company Switch


Company Switch

Company Switch

Standard Feature

  • Available in 400 AMP, 200 AMP, 100 AMP or 60 AMP.
  • Available with Cam or Posi-Lok connectors
  • Manufactured from 12-gauge steel.
  • Phase and ground indicator lights.
  • Shunt trip mechanism.
  • Keyed lock and pull handles for added breaker protection.
  1. Unit shall be UL listed and labeled.
  2. Enclosure to be fabricated using 12-gauge steel.
  3. Enclosure to have four (4) welded mounting tabs.
  4. Unit shall contain one (1) 3-pole main breaker with 65K AIC rating.
  5. Breaker shall be installed with a shunt trip mechanism that activates when the access door is opened.
  6. Access door shall contain a keyed locking “T” handle.
  7. Breaker shall be equipped with a padlock attachment to lock the handle in the off position when not in use.
  8. Fused indicator lights shall be provided for each phase and ground continuity.
  9. Pull handles shall be installed on each side of the breaker to protect the switch.
  10. All internal power connections shall be to UL listed insulated power distribution blocks with up to 500 MCM wire capacity.
  11. Output connections shall be provided by UL listed insulated power distribution blocks with up to 500 MCM wire capacity.
  12. Cable entry opening shall contain five (5) or six (6) 1.25 x 3” slots.
  13. Cable connection shall be through hinged door that can only be accessed from inside connection chamber.
  14. Bare cable connection to distribution blocks shall be secured with spring loaded strain relief.
  15. UL listed output receptacles shall be mounted inside connection chamber.
  16. Connection chamber is protected by a locking access door and an interlock switch wired to the breaker shunt trip.

Ordering Product

Catalog number shall be as follows with XXX representing the ampacity

  • Cam Connector, 5 wire:DS-XXX-5W-C
  • Cam Connector, 6 wire:DS-XXX-6W-C
  • Sequential Interlock, 5 wire:DS-XXX-5W-P
  • Sequential Interlock, 6 wire:DS-XXX-6W-P


Disconnect Switch


Wire Count

Cam or Posi-Lok

Sample: DS-400A-6W-C
400 Amp company switch with 6 cam connectors with reverse ground/neutral and double neutral.